It seems that you're using an outdated browser. Some things may not work as they should (or don't work at all).
We suggest you upgrade newer and better browser like: Chrome, Firefox, Internet Explorer or Opera

×
Hi guys last night when i was playing games on my laptop i heard fan spining on high speed so i picked up lap and blow into the air vent. After that i my lap top is vibriting lightly when fan start spinning at higher speed. and if it spins on max i can hear fan i think... (left side where is my touchpad is located). Sorry for bad english. :P Is that vibration normal , or i am tripping ? and is it safe to blow into the air vent with my mouth when laptop is on? And if that vibration is not normal how can i fix it, using canned air?
This question / problem has been solved by Vythonautimage
I'm guessing you dislodged some lint and dust built-up on the ventilation screen and blew it backward into the fan. I'm not sure I would blow more air in there since it would probably just send the stuff even farther inside the laptop. If it were mine, I'd take it apart to give it a good cleaning. If it's a Dell, they have really great manuals online. Dunno about other brands...
Take a vacuum cleaner on full power and try to suck the dirt out.

And do it better quick, if it is spinning unbalanced, it could damage something inside.

If it doesn't work, I am afraid taking it apart, is the only option.

And as a tip anyway: Never blow into a fan, this way all the dirt goes into the system ;)

Always try to get the dirt out (like with a vacuum cleaner).
avatar
Goodaltgamer: Always try to get the dirt out (like with a vacuum cleaner).
NOOOOO! Be careful of static electricity! Clean it only with a can of compressed air. Of course you'll have to dismantle the laptop first. As HereForTheBeer pointed, download the manual to see how to do this or watch some videos on YT.

Edit: As for the vibrations, it could be that some fans do have some dust gathered on them while others don't (maybe it got away from the blow you did) so the fan is unbalanced and you get vibrations. This is just a guess of course.. ;)
Post edited December 08, 2014 by Vythonaut
avatar
Goodaltgamer: Always try to get the dirt out (like with a vacuum cleaner).
avatar
Vythonaut: NOOOOO! Be careful of static electricity! Clean it only with a can of compressed air. Of course you'll have to dismantle the laptop first. As HereForTheBeer pointed, download the manual to see how to do this or watch some videos on YT.
hmmmmmm, using your logic you would not be able to switch on the laptop!

You are sucking the air OUT, so the only thing getting charged would be the vacuum cleaner.

And then you would also not be allowed to install any kind of fan!

Actually using compressed air is far more dangerous as you have water with it as well! Expanding compressed air, drop in temperature, hence friction, hence static energy.

Yes, the vacuum cleaner might get staticly charged in the tubes, but not the computer......
avatar
Goodaltgamer: - hmmmmmm, using your logic you would not be able to switch on the laptop!
- You are sucking the air OUT, so the only thing getting charged would be the vacuum cleaner.
- And then you would also not be allowed to install any kind of fan!
- Actually using compressed air is far more dangerous as you have water with it as well! Expanding compressed air, drop in temperature, hence friction, hence static energy.
- Yes, the vacuum cleaner might get staticly charged in the tubes, but not the computer......
"It’s bad to clean the inside of your computer with a vacuum cleaner because vacuuming creates a large static build up that could (and most likely will) discharge into the sensitive electronics inside your computer case. There are specialized vacuum cleaners designed for cleaning out computers and electronic equipment but given the limited amount of use a single user would get from such a purchase it’s not a very wise one—they start at $300+ and can easily break the $1000 price barrier.

What we’d recommend doing is taking your computer case into a well ventilated area (outside on a sunny day or in your garage is a great place), grounding the case to protect against static discharge (although the risk here is very very low) and using compressed air to clean the dust off. If you’re using an air compressor (as opposed to just a can of compressed air from the computer store) make sure to start a good 24″ or so away from the case and work your way in closer. You want to use just enough air pressure to blast the dust off the surfaces and out of the case without overdoing it and pushing dust into even more difficult to remove places.

One important thing to consider: compressed air (from a compressor, not a can) contains minute amounts of water vapor. Although we’ve never actually heard of this happening to anyone it is (however remote the chance) possible to blow moisture into the connectors on your mother board and damage it if you were to boot it immediately afterwards. This is in the range of lightening-strike remote, however. None the less to be extra cautious we would recommend that you leave the computer off and in a warm dry location for a few hours after you give it a good air-compressor cleaning to allow any residual moisture (if it’s even there to begin with) to evaporate. This borders on paranoid caution, mind you, but better safe than sorry."

"Click here for the source"
avatar
SnoBlue: ...
Open the case and clean the inside and the fan. Vacuum cleaners can do wonders but be careful as they can damage the fan if it spins to fast or if the air stream pulls to much on it.
Touch big metal things before opening the case to get rid of any static. Also be careful with the vacuum cleaner's pipe being charged with a static while running. Touch big metal things with it as well. It's not so dangerous as some people are describing it. I've done it for years .. no problems. Overheating is much more dangerous.

If the vibrating persists, the ball bearings might be dirty or damaged. As long as the fan runs full speed it's technically okay, but it'll get annoying and you should consider changing the fan, before you're facing dangerous overheating problems.
Post edited December 08, 2014 by DeMignon
avatar
Vythonaut: "It’s bad to clean the inside of your computer with a vacuum cleaner because vacuuming creates a large static build up that could (and most likely will) discharge into the sensitive electronics inside your computer case. There are specialized vacuum cleaners designed for cleaning out computers and electronic equipment but given the limited amount of use a single user would get from such a purchase it’s not a very wise one—they start at $300+ and can easily break the $1000 price barrier.

What we’d recommend doing is taking your computer case into a well ventilated area (outside on a sunny day or in your garage is a great place), grounding the case to protect against static discharge (although the risk here is very very low) and using compressed air to clean the dust off. If you’re using an air compressor (as opposed to just a can of compressed air from the computer store) make sure to start a good 24″ or so away from the case and work your way in closer. You want to use just enough air pressure to blast the dust off the surfaces and out of the case without overdoing it and pushing dust into even more difficult to remove places.

One important thing to consider: compressed air (from a compressor, not a can) contains minute amounts of water vapor. Although we’ve never actually heard of this happening to anyone it is (however remote the chance) possible to blow moisture into the connectors on your mother board and damage it if you were to boot it immediately afterwards. This is in the range of lightening-strike remote, however. None the less to be extra cautious we would recommend that you leave the computer off and in a warm dry location for a few hours after you give it a good air-compressor cleaning to allow any residual moisture (if it’s even there to begin with) to evaporate. This borders on paranoid caution, mind you, but better safe than sorry."

"Click here for the source"
http://www.ehow.com/how_7380688_rid-static-vacuum-hose.html#ixzz1J9DFqtGD

It is only generated in the tube, and you shall not touch the tube with any board, agreed, but to build up a sufficient charge, which would go across the fan is quite a major task and would require such a high level of air flow, so impossible.

YES the vacuum cleaner will get charged and a lot of people are holding it right onto motherboards and similar and THEREFOR damaging their equipment!

To build up enough C to get a lightning is next to impossible when talking about this situation.

If you keep it 2 cm's away you are more than safe.
avatar
Goodaltgamer: ..but to build up a sufficient charge ... would require such a high level of air flow, ...
Unless you vacuum sand, e.g. from a bird's cage. You'd be surprised. Anyway, not much sand in my laptop case lately ;-)
avatar
Goodaltgamer: http://www.ehow.com/how_7380688_rid-static-vacuum-hose.html#ixzz1J9DFqtGD
- It is only generated in the tube, and you shall not touch the tube with any board, agreed, but to build up a sufficient charge, which would go across the fan is quite a major task and would require such a high level of air flow, so impossible.
- YES the vacuum cleaner will get charged and a lot of people are holding it right onto motherboards and similar and THEREFOR damaging their equipment!
- To build up enough C to get a lightning is next to impossible when talking about this situation.
- If you keep it 2 cm's away you are more than safe.
Interesting link you've posted! Thanks for providing some interesting facts in your post but I still prefer the compressed air way of cleaning (plus isopropyl alcohol for those difficult cases of dirt). I can't take the risk with the vacuum. ;-)
avatar
Goodaltgamer: ..but to build up a sufficient charge ... would require such a high level of air flow, ...
avatar
DeMignon: Unless you vacuum sand, e.g. from a bird's cage. You'd be surprised. Anyway, not much sand in my laptop case lately ;-)
LOL!!!!!!!!!

Yep, best way to create friction!!!!! Best use the sand used for those abrasive blasting devices!
avatar
Goodaltgamer: ..but to build up a sufficient charge ... would require such a high level of air flow, ...
avatar
DeMignon: Unless you vacuum sand, e.g. from a bird's cage. You'd be surprised. Anyway, not much sand in my laptop case lately ;-)
Sawdust is a good one, too. I've had static build up high enough that it made a loud <SNAP> when the charged hose became grounded. Through me. Ouch.

To the OP, good luck with disassembly - I'm assuming this is the route you'll have to take. If you do go that far, I would take the opportunity - if it's a laptop with a couple years on it - to replace the thermal paste at the same time.
One last thing: due to differences in humidity, in winter you blow it out and in summer you vacuum. Summer's higher humidity reduces static shock problems while winter's low humidity reduces condensation problems.